Steelhead is leading the shift to a true Internet of Things (IoT) data acquisition experience that incorporates low-power, all-in-one, and patented technology.
Mix and match third-party sensor brands and types.
Easily configure to an SDI-12, Modbus RTU over RS-485, and/or Pulse sensors.
The HydraProbe®’s detailed mathematical and signal characterization of the dielectric spectrum helps factor out errors in the soil moisture measurement such as temperature effects, errors due to salinity, and soil type. Low inner-sensor variability means there is no need for sensor-specific calibrations.
Simple to setup, collect, manage, and analyze your data. Use the Steelhead mobile app via Bluetooth or Stevens-Connect to get started.
3-year battery life*
*Assumes 15-minute logging,
12- hour reporting, 2 sensors
Includes an internal 28 Ah
non-rechargeable battery
Stevens solar panel optimally designed for the Steelhead
Includes solar panel mounting bracket, an internal battery charging regulator, and both
a 10.5 Ah rechargeable and a 28 Ah non-rechargeable battery
7 to 16V DC / 3-amp power from an AC/DC adaptor or an external battery
Includes an internal 10.5 Ah rechargeable battery. AC/DC adaptor or external battery can be added
ALL-IN-ONE COMPACT DESIGN
COMMUNICATIONS
MOBILE APP
STEVENS-CONNECT INTEGRATION
| Sensor Data | Logging Interval | Configurable from 1 minutes to 24 hours |
|---|---|---|
| Reporting Interval | Configurable from 5 minutes to 24 hours | |
| On-board storage | 400,000 records typical. depending upon the sensor type | |
| Data Memory | 64MB Flash memory | Non-volatile Flash Memory, complete data retention with loss of power |
| Sensor Interface | Supported sensor types | SDI-12 bus |
| Modbus RTU over RS-485 | ||
| 2 Pulse inputs, individually configurable as low speed (<100Hz) or High speed (KHz) |
||
| Sensor Connectors | 3 x M12 A connectors. Connect more sensors using split cables or break-out box |
|
| Sensor Power Supply | Switched | |
| Power Output for Sensors | 12V DC with max. current source 200mA | |
| Parameters | 30 sensor parameters in total | |
| Number of Sensors | 10 ~ 20, based on the current consumption and number of parameters |
|
| Internal Barometric Sensor | Range 300 to 1250 hPa | 12-month long-term stability: ±0.33 hPa Absolute accuracy pressure (typ.): +/- 0.5 hPa; P=900 …1100 hPa (T=25° to 40°C) Relative accuracy pressure (typ.): ±0.08 hPa, P=900…1100 hPa (T=25° to 40°C) |
|
| Communications | Cellular | 4G LTE or Cat-M |
| Antenna | Internal antenna: 698-875 MHz (1.9 gain) or 1710 – 2500 MHz (3.7 gain) Options: SMA connector for external antenna |
|
| Mobile App communication | BLE 5.0 Bluetooth low energy protocol | |
| GPS | GPS, GLONASS, BeiDou/Compass, Galileo and QZSS | |
| Mechanical/ Environmental | Dimensions | 240 mm x 170 mm x 60mm (9.44 in x 6.7 in x 2.3 in) |
| Enclosure Material | UV-resistant polymer | |
| Ingress Protection | IP-68 (dust proof and waterproof up to 1 meter immersion for 30 minutes) |
|
| Operating Temperature | -40°C ~ +80°C (-40°F ~ +176°F) | |
| Lightning and Power Protection | Dedicated grounding lug Each input, output, and sensor power line has isolated gas discharge tubes, series current limiters, transient voltage suppressors (TVS), electrostatic discharge, electrical fast transient and lightning surge protection |
