Search
Close this search box.
Search

True Soil Profiling Quantification

Unlike any other soil profiling probe, GroPoint Profile provides true soil profiling quantification, measuring the average moisture across the entire length of each segment (15cm or 6”), because there are no gaps between segments.

This unique feature allows measuring the water movement through the soil continuously, rather than just at discrete positions on the probe.

Configurations

GroPoint Illustration Configurations Segment 1, 2 Stevens Water Monitoring
GroPoint Illustration Configurations Segment 1, 2, 3 Stevens Water Monitoring
GroPoint Illustration Configurations Segment 1, 2, 3, 4, 5 Stevens Water Monitoring
GroPoint Illustration Configurations Segment 1, 2, 3, 4, 5, 6 Stevens Water Monitoring
GroPoint Illustration Configurations Segment 1, 2, 3, 4, 5, 6, 7, 8 Stevens Water Monitoring

Installing a GroPoint Profile probe is quick and easy with no excavation required. Attach the slide hammer to the sturdy steel pilot rod. Slide the top segment of the slide hammer up as much as it goes, then down forcefully. It will strike the bottom segment and drive the attached pilot rod into the soil. The hole will be the exact size of the probe, so not only is there minimal disruption to the surrounding soil, there will be no air gaps between the probe and the undisturbed soil. This clever design further increases measurement accuracy. The slide hammer is used to extract the pilot rod again, with a couple of quick upward movements (like hammering in reverse).

GroPoint Profile is available in six different multi-segment lengths, suitable for a wide range of agricultural crop monitoring.

You can also choose from two different configurations for temperature sensors, depending on your requirements. You can configure it with no temperature sensors if you only require moisture measurement, or the standard configuration places temperature sensors every 1 or 2 segments.

Choose the number of 15 cm (6″) segments that are right for your application. Custom lengths also available.

This single 4-segment probe is equivalent to 4 separate probes, each measuring the average moisture across 15cm (6″). Soil moisture is measured at 4 different depths simultaneously. Each segment averages the volumetric moisture content measured over 15 cm (6″). Together, the range covered is the length of the entire probe, with no gaps between.

Multi-depth options

The Most Accurate and Cost-Effective Soil Profiling Solution Available

  • Eliminates need for multiple sensors and cabling systems.
  • Measures across the entire length of the probe, averaging the soil moisture and temperature in each segment
  • Installs quickly and easily without excavating.
  • One SDI-12 address is used to read all segments, providing for simplified installations. Optional RS-485 output.
  • Moisture readings can be user-calibrated with 3rd-order polynomials to meet custom requirements.
  • Low power requirements—suitable for remote, autonomous applications.
  • Patented TDT5 technology for scientific-grade accuracy and excellent long-term stability of measurements.
  • Fully potted electronics for excellent durability.

Moisture
Measurement range8% to 40% of VWC
Accuracy2% to 5% for most soils, accuracy depends on soil
Repeatability<0.2%
Temperature
Measurement range-20°C to +70°C (-4°F to 158°F)
Accuracy±0.5°C
Electrical
OutputSDI-12 V1.3 (RS485 optional)
ConnectionBare wire (optional 4 pin, IP66/IP68 rated environmental connector)
Input voltage6 to 14 VDC max. 18 VDC
Current consumptionQuiescent: <0.5mA
Active: 15-20 mA (depending on number of segments) for 100 mS
Warm-up time on power up<1 second
Environmental
Operating temperature-20°C to 70°C (-4°F to 158°F)
Storage temperature-40°C to 85°C (-40°F to 185°F)
Physical
LengthEach segment is approximately 15 cm (5.9″) long. Total length is the number of segments multiplied by 15 cm. For example, a 3-segment probe is about 45cm long.
Probe weight2 segments: 292 g (10.3 oz.)
3 segments: 351 g (12.4 oz.)
4 segments: 408 g (14.4 oz.)
5 segments: 468 g (16.5 oz.)
6 segments: 526 g (18.6 oz.)
8 segments: 642 g (22.6 oz.)
Cable weight38 g per m (0.42 oz. per foot)
Standard cable5 m (16.3 ft.)
4xAWG22 dual-shielded, twisted pair, rated for direct burial
Warranty1-year limited parts and labor

PART #
DESCRIPTION
51162-102GroPoint Profile 2 segments, w/ 5 m cable
51162-103GroPoint Profile 3 segments, w/ 5 m cable
51162-104GroPoint Profile 4 segments, w/ 5 m cable
51162-105GroPoint Profile 5 segments, w/ 5 m cable
51162-106GroPoint Profile 6 segments, w/ 5 m cable
51162-108GroPoint Profile 8 segments, w/ 5 m cable
51162-502Pilot Rod for 2 segments GroPoint Profile
51162-503Pilot Rod for 3 segments GroPoint Profile
51162-504Pilot Rod for 4 segments GroPoint Profile
51162-505Pilot Rod for 5 segments GroPoint Profile
51162-506Pilot Rod for 6 segments GroPoint Profile
51162-508Pilot Rod for 8 segments GroPoint Profile
51162-600Slide Hammer for GroPoint Profile

The Most Accurate and Cost-Effective Soil Profiling Solution Available

  • Eliminates need for multiple sensors and cabling systems.
  • Measures across the entire length of the probe, averaging the soil moisture and temperature in each segment
  • Installs quickly and easily without excavating.
  • One SDI-12 address is used to read all segments, providing for simplified installations. Optional RS-485 output.
  • Moisture readings can be user-calibrated with 3rd-order polynomials to meet custom requirements.
  • Low power requirements—suitable for remote, autonomous applications.
  • Patented TDT5 technology for scientific-grade accuracy and excellent long-term stability of measurements.
  • Fully potted electronics for excellent durability.

Moisture
Measurement range8% to 40% of VWC
Accuracy2% to 5% for most soils, accuracy depends on soil
Repeatability<0.2%
Temperature
Measurement range-20°C to +70°C (-4°F to 158°F)
Accuracy±0.5°C
Electrical
OutputSDI-12 V1.3 (RS485 optional)
ConnectionBare wire (optional 4 pin, IP66/IP68 rated environmental connector)
Input voltage6 to 14 VDC max. 18 VDC
Current consumptionQuiescent: <0.5mA
Active: 15-20 mA (depending on number of segments) for 100 mS
Warm-up time on power up<1 second
Environmental
Operating temperature-20°C to 70°C (-4°F to 158°F)
Storage temperature-40°C to 85°C (-40°F to 185°F)
Physical
LengthEach segment is approximately 15 cm (5.9″) long. Total length is the number of segments multiplied by 15 cm. For example, a 3-segment probe is about 45cm long.
Probe weight2 segments: 292 g (10.3 oz.)
3 segments: 351 g (12.4 oz.)
4 segments: 408 g (14.4 oz.)
5 segments: 468 g (16.5 oz.)
6 segments: 526 g (18.6 oz.)
8 segments: 642 g (22.6 oz.)
Cable weight38 g per m (0.42 oz. per foot)
Standard cable5 m (16.3 ft.)
4xAWG22 dual-shielded, twisted pair, rated for direct burial
Warranty1-year limited parts and labor

PART #
DESCRIPTION
51162-102GroPoint Profile 2 segments, w/ 5 m cable
51162-103GroPoint Profile 3 segments, w/ 5 m cable
51162-104GroPoint Profile 4 segments, w/ 5 m cable
51162-105GroPoint Profile 5 segments, w/ 5 m cable
51162-106GroPoint Profile 6 segments, w/ 5 m cable
51162-108GroPoint Profile 8 segments, w/ 5 m cable
51162-502Pilot Rod for 2 segments GroPoint Profile
51162-503Pilot Rod for 3 segments GroPoint Profile
51162-504Pilot Rod for 4 segments GroPoint Profile
51162-505Pilot Rod for 5 segments GroPoint Profile
51162-506Pilot Rod for 6 segments GroPoint Profile
51162-508Pilot Rod for 8 segments GroPoint Profile
51162-600Slide Hammer for GroPoint Profile

The Most Accurate and Cost-Effective Soil Profiling Solution Available

  • Eliminates need for multiple sensors and cabling systems.
  • Measures across the entire length of the probe, averaging the soil moisture and temperature in each segment
  • Installs quickly and easily without excavating.
  • One SDI-12 address is used to read all segments, providing for simplified installations. Optional RS-485 output.
  • Moisture readings can be user-calibrated with 3rd-order polynomials to meet custom requirements.
  • Low power requirements—suitable for remote, autonomous applications.
  • Patented TDT5 technology for scientific-grade accuracy and excellent long-term stability of measurements.
  • Fully potted electronics for excellent durability.

Moisture
Measurement range8% to 40% of VWC
Accuracy2% to 5% for most soils, accuracy depends on soil
Repeatability<0.2%
Temperature
Measurement range-20°C to +70°C (-4°F to 158°F)
Accuracy±0.5°C
Electrical
OutputSDI-12 V1.3 (RS485 optional)
ConnectionBare wire (optional 4 pin, IP66/IP68 rated environmental connector)
Input voltage6 to 14 VDC max. 18 VDC
Current consumptionQuiescent: <0.5mA
Active: 15-20 mA (depending on number of segments) for 100 mS
Warm-up time on power up<1 second
Environmental
Operating temperature-20°C to 70°C (-4°F to 158°F)
Storage temperature-40°C to 85°C (-40°F to 185°F)
Physical
LengthEach segment is approximately 15 cm (5.9″) long. Total length is the number of segments multiplied by 15 cm. For example, a 3-segment probe is about 45cm long.
Probe weight2 segments: 292 g (10.3 oz.)
3 segments: 351 g (12.4 oz.)
4 segments: 408 g (14.4 oz.)
5 segments: 468 g (16.5 oz.)
6 segments: 526 g (18.6 oz.)
8 segments: 642 g (22.6 oz.)
Cable weight38 g per m (0.42 oz. per foot)
Standard cable5 m (16.3 ft.)
4xAWG22 dual-shielded, twisted pair, rated for direct burial
Warranty1-year limited parts and labor

PART #
DESCRIPTION
51162-102GroPoint Profile 2 segments, w/ 5 m cable
51162-103GroPoint Profile 3 segments, w/ 5 m cable
51162-104GroPoint Profile 4 segments, w/ 5 m cable
51162-105GroPoint Profile 5 segments, w/ 5 m cable
51162-106GroPoint Profile 6 segments, w/ 5 m cable
51162-108GroPoint Profile 8 segments, w/ 5 m cable
51162-502Pilot Rod for 2 segments GroPoint Profile
51162-503Pilot Rod for 3 segments GroPoint Profile
51162-504Pilot Rod for 4 segments GroPoint Profile
51162-505Pilot Rod for 5 segments GroPoint Profile
51162-506Pilot Rod for 6 segments GroPoint Profile
51162-508Pilot Rod for 8 segments GroPoint Profile
51162-600Slide Hammer for GroPoint Profile

The Most Accurate and Cost-Effective Soil Profiling Solution Available

  • Eliminates need for multiple sensors and cabling systems.
  • Measures across the entire length of the probe, averaging the soil moisture and temperature in each segment
  • Installs quickly and easily without excavating.
  • One SDI-12 address is used to read all segments, providing for simplified installations. Optional RS-485 output.
  • Moisture readings can be user-calibrated with 3rd-order polynomials to meet custom requirements.
  • Low power requirements—suitable for remote, autonomous applications.
  • Patented TDT5 technology for scientific-grade accuracy and excellent long-term stability of measurements.
  • Fully potted electronics for excellent durability.

Moisture
Measurement range8% to 40% of VWC
Accuracy2% to 5% for most soils, accuracy depends on soil
Repeatability<0.2%
Temperature
Measurement range-20°C to +70°C (-4°F to 158°F)
Accuracy±0.5°C
Electrical
OutputSDI-12 V1.3 (RS485 optional)
ConnectionBare wire (optional 4 pin, IP66/IP68 rated environmental connector)
Input voltage6 to 14 VDC max. 18 VDC
Current consumptionQuiescent: <0.5mA
Active: 15-20 mA (depending on number of segments) for 100 mS
Warm-up time on power up<1 second
Environmental
Operating temperature-20°C to 70°C (-4°F to 158°F)
Storage temperature-40°C to 85°C (-40°F to 185°F)
Physical
LengthEach segment is approximately 15 cm (5.9″) long. Total length is the number of segments multiplied by 15 cm. For example, a 3-segment probe is about 45cm long.
Probe weight2 segments: 292 g (10.3 oz.)
3 segments: 351 g (12.4 oz.)
4 segments: 408 g (14.4 oz.)
5 segments: 468 g (16.5 oz.)
6 segments: 526 g (18.6 oz.)
8 segments: 642 g (22.6 oz.)
Cable weight38 g per m (0.42 oz. per foot)
Standard cable5 m (16.3 ft.)
4xAWG22 dual-shielded, twisted pair, rated for direct burial
Warranty1-year limited parts and labor

PART #
DESCRIPTION
51162-102GroPoint Profile 2 segments, w/ 5 m cable
51162-103GroPoint Profile 3 segments, w/ 5 m cable
51162-104GroPoint Profile 4 segments, w/ 5 m cable
51162-105GroPoint Profile 5 segments, w/ 5 m cable
51162-106GroPoint Profile 6 segments, w/ 5 m cable
51162-108GroPoint Profile 8 segments, w/ 5 m cable
51162-502Pilot Rod for 2 segments GroPoint Profile
51162-503Pilot Rod for 3 segments GroPoint Profile
51162-504Pilot Rod for 4 segments GroPoint Profile
51162-505Pilot Rod for 5 segments GroPoint Profile
51162-506Pilot Rod for 6 segments GroPoint Profile
51162-508Pilot Rod for 8 segments GroPoint Profile
51162-600Slide Hammer for GroPoint Profile

The Most Accurate and Cost-Effective Soil Profiling Solution Available

  • Eliminates need for multiple sensors and cabling systems.
  • Measures across the entire length of the probe, averaging the soil moisture and temperature in each segment
  • Installs quickly and easily without excavating.
  • One SDI-12 address is used to read all segments, providing for simplified installations. Optional RS-485 output.
  • Moisture readings can be user-calibrated with 3rd-order polynomials to meet custom requirements.
  • Low power requirements—suitable for remote, autonomous applications.
  • Patented TDT5 technology for scientific-grade accuracy and excellent long-term stability of measurements.
  • Fully potted electronics for excellent durability.

Moisture
Measurement range8% to 40% of VWC
Accuracy2% to 5% for most soils, accuracy depends on soil
Repeatability<0.2%
Temperature
Measurement range-20°C to +70°C (-4°F to 158°F)
Accuracy±0.5°C
Electrical
OutputSDI-12 V1.3 (RS485 optional)
ConnectionBare wire (optional 4 pin, IP66/IP68 rated environmental connector)
Input voltage6 to 14 VDC max. 18 VDC
Current consumptionQuiescent: <0.5mA
Active: 15-20 mA (depending on number of segments) for 100 mS
Warm-up time on power up<1 second
Environmental
Operating temperature-20°C to 70°C (-4°F to 158°F)
Storage temperature-40°C to 85°C (-40°F to 185°F)
Physical
LengthEach segment is approximately 15 cm (5.9″) long. Total length is the number of segments multiplied by 15 cm. For example, a 3-segment probe is about 45cm long.
Probe weight2 segments: 292 g (10.3 oz.)
3 segments: 351 g (12.4 oz.)
4 segments: 408 g (14.4 oz.)
5 segments: 468 g (16.5 oz.)
6 segments: 526 g (18.6 oz.)
8 segments: 642 g (22.6 oz.)
Cable weight38 g per m (0.42 oz. per foot)
Standard cable5 m (16.3 ft.)
4xAWG22 dual-shielded, twisted pair, rated for direct burial
Warranty1-year limited parts and labor

PART #
DESCRIPTION
51162-102GroPoint Profile 2 segments, w/ 5 m cable
51162-103GroPoint Profile 3 segments, w/ 5 m cable
51162-104GroPoint Profile 4 segments, w/ 5 m cable
51162-105GroPoint Profile 5 segments, w/ 5 m cable
51162-106GroPoint Profile 6 segments, w/ 5 m cable
51162-108GroPoint Profile 8 segments, w/ 5 m cable
51162-502Pilot Rod for 2 segments GroPoint Profile
51162-503Pilot Rod for 3 segments GroPoint Profile
51162-504Pilot Rod for 4 segments GroPoint Profile
51162-505Pilot Rod for 5 segments GroPoint Profile
51162-506Pilot Rod for 6 segments GroPoint Profile
51162-508Pilot Rod for 8 segments GroPoint Profile
51162-600Slide Hammer for GroPoint Profile

The Most Accurate and Cost-Effective Soil Profiling Solution Available

  • Eliminates need for multiple sensors and cabling systems.
  • Measures across the entire length of the probe, averaging the soil moisture and temperature in each segment
  • Installs quickly and easily without excavating.
  • One SDI-12 address is used to read all segments, providing for simplified installations. Optional RS-485 output.
  • Moisture readings can be user-calibrated with 3rd-order polynomials to meet custom requirements.
  • Low power requirements—suitable for remote, autonomous applications.
  • Patented TDT5 technology for scientific-grade accuracy and excellent long-term stability of measurements.
  • Fully potted electronics for excellent durability.

Moisture
Measurement range8% to 40% of VWC
Accuracy2% to 5% for most soils, accuracy depends on soil
Repeatability<0.2%
Temperature
Measurement range-20°C to +70°C (-4°F to 158°F)
Accuracy±0.5°C
Electrical
OutputSDI-12 V1.3 (RS485 optional)
ConnectionBare wire (optional 4 pin, IP66/IP68 rated environmental connector)
Input voltage6 to 14 VDC max. 18 VDC
Current consumptionQuiescent: <0.5mA
Active: 15-20 mA (depending on number of segments) for 100 mS
Warm-up time on power up<1 second
Environmental
Operating temperature-20°C to 70°C (-4°F to 158°F)
Storage temperature-40°C to 85°C (-40°F to 185°F)
Physical
LengthEach segment is approximately 15 cm (5.9″) long. Total length is the number of segments multiplied by 15 cm. For example, a 3-segment probe is about 45cm long.
Probe weight2 segments: 292 g (10.3 oz.)
3 segments: 351 g (12.4 oz.)
4 segments: 408 g (14.4 oz.)
5 segments: 468 g (16.5 oz.)
6 segments: 526 g (18.6 oz.)
8 segments: 642 g (22.6 oz.)
Cable weight38 g per m (0.42 oz. per foot)
Standard cable5 m (16.3 ft.)
4xAWG22 dual-shielded, twisted pair, rated for direct burial
Warranty1-year limited parts and labor

PART #
DESCRIPTION
51162-102GroPoint Profile 2 segments, w/ 5 m cable
51162-103GroPoint Profile 3 segments, w/ 5 m cable
51162-104GroPoint Profile 4 segments, w/ 5 m cable
51162-105GroPoint Profile 5 segments, w/ 5 m cable
51162-106GroPoint Profile 6 segments, w/ 5 m cable
51162-108GroPoint Profile 8 segments, w/ 5 m cable
51162-502Pilot Rod for 2 segments GroPoint Profile
51162-503Pilot Rod for 3 segments GroPoint Profile
51162-504Pilot Rod for 4 segments GroPoint Profile
51162-505Pilot Rod for 5 segments GroPoint Profile
51162-506Pilot Rod for 6 segments GroPoint Profile
51162-508Pilot Rod for 8 segments GroPoint Profile
51162-600Slide Hammer for GroPoint Profile

Request A Quote Specific

How can we reach you?

Name
Name

How can we help?

How can we help?

We would like to hear from you. Fill out the form below to help us connect you with the right team, and we will get back with you shortly.